MD let me know what you think of the versafuler. also i was a little disappointed you did not post up pics of the cage. BTW the rest of my MS3 parts arrived today. tomorrow ill start building the PCM.
Well it has not gotten any further really. We found out the MAIN HOOP which came from the 8 Point Kit I bought from ART MORRISON was bent incorrectly which was throwing off the Pillar bars. So we had to heat up the main hoop at the floor plates so the upper part of the hoop at the headliner moved toward the passenger side about 1/2", take out the HALO bar we just bent and bend a new one. I got the metal under the dash notched and the floor plates tacked in for the Pillar Bars. We are moving the pillar bars as far forward as possible hugging the glass and trying to follow the pillar as best as possible so I should hopefully not need to cut into the DASH PAD and only have to cut the metal part of the dash for the pillar bars, this is very time consuming. Today if my buddy can make it we will be doing the pillar bars and hopefully the forward bars that tie into the front frame rails.
Ill post some pictures of the progress after today's work "If we get to work on it" Otherwise I will be working on the other Turbo Brace and figuring out the wiring for the EFI Harness.