**Twin Turbo 67 Dart Project**

I just started messing around with the wiring even though Summit has a part I need on Back order.

First off I tried to come up with a configuration for the Hardware that will fit under the dash where the Heater Box/Blower motor use to be. I used a piece of 6061 Aluminum I had laying around to make the Rack out of.

I did not get that far today. The only thing I got half done was splicing in the Versafueler. For some reason I forgot to pick up some solder? Duhhh. So it is spliced in ready for soldering up the wires with the Heat Shrink on ready to slip over the soldered joints. I made sure to stagger the Solder Joints so they don't rub each other and create a problem like a "Short".

Still have a bunch to do.

View attachment phphEpWYaPM.jpg

View attachment phpq742LZPM.jpg

View attachment phpWB16i9PM.jpg

View attachment phpUARlnCPM.jpg

View attachment phpVTCKaYPM.jpg

View attachment php4B3wQXPM.jpg