4sp RB in a SB/Auto car?

Let's see...... You will need for sure...... An RB engine,4 speed a-body trans with shifter and linkage, bellhousing with flywheel,disc,pressure plate, release bearing and fork that all match, engine mounts and headers (Schumacher makes good ones that will fit your k-member), pulleys and brackets for the engine, H.D radiator, clutch/brake pedal assembly,clutch rod and bellcrank, pivot mounts on frame and bellhousing,adj. link to fork,and a shifter tunnel hump. You also must alter your engine wiring harness to extend the coil wires. This is the bare minimum. You must have an 8-3/4 rear diff. and drive shaft at a minimum for strength. Other considerations would be 73-76 a-body discs and bbp axles for the rear, a 8-3/4sure grip, H.D. torsion bars, upgrade your fuel system to 3/8 or bigger all the way from the tank, steering column collar if yours is column auto, reverse light for dash electronic ignition, hood clearance issues,electric fuel pump..... Maybe get ahold of Brewer's or Passon performance or maybe tti exhaust for more info. and suggestions. good luck. Hope this helps. Tom.