Need help with a logical plan

Beautiful car you bought! Good luck with it!

I'd suggest a set of KYB gas shocks and a polygraphite bushing package. Just DON'T install the lower control arm bushings with the ploy's... unless they've been re-engineered. The lower poly's bushing have a habbit of moving around. Otherwise, the poly kit really tightens up the front end. If the joints and tie rods are questionable this would be a good time to think of re-building the front end. A complete kit will run about $400 for all the bushings and hard parts (ball joints,tie rods, sleeves, idler arm, etc...) Next up would be a set of sub-frame connectors. These tie the front and rear unibody frames together making the car stiffer, a serious consideration for a convertible. These need to be welded in, although they do sell bolt-in connectors, which just seem to be another flex-point for the chassis.


http://www.p-s-t.com/mopar/mofekpgs.html#PLYMOUTH



BTW: My Sister moved to Orlando a few months ago. When I come down to visit her I'll have to beat the drum and round up all you Floridians for a get together.