**Twin Turbo 67 Dart Project**

Well I have fuel pump concerns for dyno day. Brian has a A-1000 Pump and from doing some research on theturboforums.com , I believe we will be running out of fuel at right around 10PSI, I would like to tune it to 15PSI. So I am trying to put together a Triple Walbro set up like this one here. I will use the Jegs Fuel logs instead because of the color. Of course with Black An Fittings. I will run 2 10an lines into the feed, 1 on each end of the inlet fuel log and a single 10an to the Regulator and an 8an Return with a filter on the inlet before the pumps and one after before the regulator.

Guys on theturboforums.com are successful to 900HP using 2 of these pumps at over 60PSI Fuel Pressure. I believe 3 of these will get it done. Plus no controller and they are super quite! They say that this set up will flow more than Twice the amount of fuel that an A-1000 pump will flow.

Going to look like this here but with BIGGER wire for sure.....

View attachment fuelpumps.jpg

But with this color logs...........

View attachment 555-15932_1.jpg