low compression

Can this include 318 too? I just found out that one of my head gaskets is leaking oil. So while I have the top end of my engine off I would do a few things. Most likely I will need to have the heads resurfaces but not rebuilt,clean the carbon off the top of the pistons,change intakes (Weiand Action Plus) and add a Eddy 1406 600 cfm carb.

I already have the intake and carb along with a adapter plate. So I might need a little help on the cam that will be best for my car. Here is some info on my car below.

car weight 4200 +/- a few lbs

Stock 318 was a 2 bbl lean burn now a 4 bbl electronic ignition

trans a A998

rear axle 8.25

gear ratio 3.08

27 inch tires may go to 28 in tires. (tire size is 255/60/15)