(was) Very disappointed in Mancini Racing

i had a sh!tty dealing with them and wil ltry my best to not by from them again. they dont have anythign you cant find anywhere else. i bought some of their own products, aluminum front and rear spring bushings and a set of shackles, along with a bunch of other crap. the front eye bushing i was able to push in by hand, it had no shoulders since it was a 1 pc bushing so there was nothing to stop the springs from sliding side to side on the bushing in the spring hanger. they came with a steel sleeve, but the wall thickness was thinner than emt conduit. i figured i could live with them. why i dont know. so onto the back, i go to do the shackle bushings. they were aluminum with an oilite inside. ok didnt look too bad other than the hole in the oilite looked too small. i open up the shackle, the bushings had a 3/8" hole in them, they fit over the threads but not the actual shaft for the bushings. the od of the oilite was only mayeb 1/2 at most. so i call them up and get some prick, so i eas into it. i ask him what shackles the bushings are made for? he says they work with all shackles sir. ok so they should work perfect for a stock shackle then right? absolutely, thats what they are designed for. so i tell him i bought them i have them right in front of me and it just doesnt work. he tells me i must have the wrong parts and all this crap trying to talk to me liek i dont know what im doing. i ask him if he thinks im wrong, if there is any way possible he can get the parts and try it for himself. he was so confident in himself, he put me on hold and went to get the stuff to prove me wrong. picks u pthe phone and hes talking to me like a real prick while hes opening the boxes to put the stuff together the way it is designed. hmmmmm. well it looks like you are right sir, jsut drill out the oilite to fit. no im not drilling out anything you need to redesign this garbage along with the front eye pos bushing. he told me to send it back. ok send me a shipping label, oh no we dont do that, you can make these parts work thats on you if you dont want to or if you want to send them back. the shackle buchings are sitting in my basement 7 years later. the front bushings were on the car when i sold it. i consider it a lesson.