**Twin Turbo 67 Dart Project**

All my problems with this ignition will soon be a memory, then it will be something else like trying to keep it in a straight line.

On another note I found out the the MS3X is already set up for the use of 3 different type of sensors for the Cam Signal "Hall, VR & Optical"....... So in theory I can just use the Lean Burn Dizzy. I bought one today from Rockauto for $38.00......... I will do more research before I use the internal VR Sensor but at least it is already locked out with no Vac Advance.

I did take the FAST Distributor completely apart today. The backing plate rests on Plastic spacers and is held down with a C - Clip kind of a Crappy design. I could probably drill the backing plate out and add 4 screws at 90* apart to hold it so it would never wiggle, This should have been in there design from the factory. It is a poorly designed set up and I would not recommend that distributor to anybody.