Racer Brown ST-21

Lakeeffect said

That made me Stoked. I will definitely be running it. Plus i like the sound. Thanks IQ52.

I know i the Eddy's are more and not really as good with lots of problems out of the box. But 50'lbs is worth a lot to me. My dad offered/has a set of older W2's T&D rockers Ti retainers and as cast. I could use but they are closed chamber but i don't believe i could get my compression ratio down with out buying new pistons again.

Fishy68 you explained that really well. Thanks!

Click to expand...

Your welcome. Yes the 55 lb savings is nice if you can swing them financially. Nevertheless I agree with 64Physhy to run the W2's even if they are heavier iron and the compression might be a little high. I'd at least cc a chamber to see how many cc's they are then you could figure what to run for a head gasket thickness that will get you down to 10.5 to 1 which I think it'd run ok on pump gas with that big of a cam. Also as I mentioned earlier polishing the chambers helps a lot on reducing detonation. I bet it'd be 450+ hp with that combo. and run on 93 octane if tuned right.