Looking for cam shaft advice

I am in the prosess of building a 426 hemi for a street/strip car,this is what I have so far:
Stock crank 3.75 stroke
Stock bore 4.25 W/10.5 to 1 compression
Going to go with Indy Legend heads and complete valve train,rockers,etc.
Now comes my issue I was going to run a hydraulic roller cam and lifters but if i take that route my biggest lift will be a .574/.551 with a 110 LSA
but I can go higher if I run a solid lifter cam.
The heads will handle up to a 650 lift cam but I need the car to be somewhat streetable.

Any Ideas?