**Twin Turbo 67 Dart Project**

Sensor did not show up. I took the Crank Trigger Wheel to my friends shop who has a Lathe to open up the pilot hole the same size as the Crank pulley. I am having him drill it for 12 holes in the wheel so I can adjust it 30* either way on the damper. The Hall Sensor Bracket that I will be making will also be adjustable up to 20* in each direction.

I also ordered a fan spacer that I will use behind the water pump pulley. I had 1/4" of spacers behind that pulley to line up with the crank. The Trigger wheel is 1/4" Thick so I now need 1/2" so it will line up. I have not fabricated the final Alternator brackets so I am not concerned with it lining up correctly.

Here is the spacer....

http://www.summitracing.com/parts/FLX-504/