Best cam degree kit???

You don't really need a "kit." All you need is a degree wheel, (get a big one) or MAKE one--you can print them out here and there off the www, and you need a dial indicator. You don't need a Starrett, either. There are several places you can get an indicator that's adequate. Get one with a universal arm and probably a magnetic base, you can use it for other things.

The following step by step from Lunati illustrates all you need:

http://www.lunatipower.com/Tech/Cams/HowToDegreeACam.aspx

I've bought a lot of stuff from KBC tools:

http://kbctools.com/usa/main.cfm

If I did this right, this link should open a pdf to a KBC indicator for 40 bucks which is more than adequate:

Make sure you get one with enough stroke, IE 0-1" so you can measure actual valve lift if you need to

http://kbctools.com/usa/Navigation/NavPDF.cfm?PDFPage=0651