73' B3 340 Duster pro touring build

t-granger said

Ross,

You need to stop you are making us all look bad here with your mods.
So two things first how are you going to mount the brake bias, the reason I ask is because I have that one as well and have not yet figured out where or how to mount it.

Second I like the newer style cowl design I think it looks cleaner, but hey I removed my vent so what do I know, right?

But I have to say it all looks good as usual.

I really like the clean fender look, I might just steal that idea from you, If I can get my lazy butt out there to do some work. My classes have taken up so much of my extra time lately.

Click to expand...

Timothy,
Here's where I decided to mount the Brake bias valve. I cut out a section of the frame to weld 5/16"-18 nuts on back side to serve as threaded inserts then welded the frame section back in and then ground the welds, I had to modify the bent over factory pinch weld to clear the inlet fitting's....a little filler and it will all look factory again.


I made a quick trip to Summit Racing after taking some reference measurements from the radiator opening to start mocking up the radiator mounts, what I ended up with was a near perfect fit.... should be a easy install, more pics on this once I get the mounts made. One more thing... I failed attempting to made a cowl opening vent with a factory depth look to it, so I decided to just eliminate the opening since it wont really benefit me anyway.