this is rediculous!!

Seal Power also offers shafts for about $30 a pair any local Parts store should be able to order them for you. They're made in China, lousey finish, soft but you want cheap.

I don't know where your shopping but I've never heard of rocker shafts for $200, I think Harland Sharpes are only about a $100?

You got new roller rockers for $200?
I'll bet they're bang on the money, the best Hop Chow Suey can build.

The last set of 1.5 chinese arms I checked for a customer ran from 1.42 to 1.68 the screws we're so loose you couldn't even get a constant adjustment on the checker bar.

We just pulled a set of "High Quality" chinese arms off a set of BB Vic Jr. heads. The adjusters were so bad they loosened up after 1-2 passes, spit the pushrods out a couple of times, finally the harmonics killed a brand new set of Isky SP springs and it tagged all the valves. He saved $700 by going with the cheap arms, it cost him $3000 to fix the damage and still ended up buying a good set of Harlands rockers. I enjoyed the "Told you so" and running his credit card. He's just lucky he didn't scatter the motor.

Looks good?
NO such thing (Unless you happen to be Superman), measure, test, inspect you'll figure it out.
A quality set of rocker arms will cost $400- $600, they'll last for years, won't create valve train harmonics, won't kill the guides, springs and locks. Go cheap and it'll cost you big time over the long haul.

....and speaking of "Looks Good", to the trained eye that stuff doesn't look good! These peddlers of these Chinese parts are just preying on the unknowing consumer.

How does that old saying go......"Investigate before you invest"