Pedal difference?

The pin spread is the diiference year to year that is important for manual clutch. For a hyd. clutch you will need a master and a slave. A 1989 and up to 1993 uses a hydralic clutch set up on all 1/2 ton pick-ups with the OD trans. You will be able to use all of these components. The bell housing has the large hole for th OD trans bearing retainer so you will need to make a Bushing /adapter to reduce the size for a 833 4 spd trans. The cutch pedal assembly for a car can be used . To modify your car assembly The top of the pedal must be moved over to make room for the master push rod on your car pedals. I used another brake pedal arm from an automatic and welded it to the outside of the clutch pedal pivot after cuttimg the clutch pedal off . Save the pedal pad you will need to use it to replace the larger automatic pad to make them the same size.