66 dart LED prototype working for now

here's the pattern for the rear led's
this lets me test fit things by cutting out the outside shape. the heavy black outline is (or will be) the copper traces that I'll have made to solder the led's to and use as a heat sink material.
the top 2 bar's are what power from the tails and brake wires solder to.
bottom lead is the ground. (BIGGER is better in this case)
View attachment DSCF2706.jpg
and a sample of the front with resistors on and working
front side you can see the schottky diodes and both set's of resistors going to the leds.
View attachment DSCF2708.jpg
back side (excuse the soldering it'll look a lot nicer after I get the boards made) one red is brake/turn and the second one is tails. black is ground.
View attachment DSCF2710.jpg
here is how it all connects without cutting wires
View attachment DSCF2709.jpg
here's the pattern ,you can see the power taps and everything
View attachment DSCF2728.jpg