intake bolt sealer

Never heard of sealing intake bolts. Never did it, never had a intake bolt wick oil up the threads and pool. I would look at the bolt length real close and if it's actually sealing. Come to think of it, I really don't believe those holes go to the valley. Nope, they go straight through to the head and are open holes that exit in between the pushrod area right where the oil drains back out of the head from the rockers. Now that I have a good understanding of what's going on I would make sure the bolts are the correct length and mating surfaces of the head and intake. Have these heads been milled? I would think the oil is getting into the gasket area and then maybe coming up the bolts. I find it hard to believe that a non-porus material is going to wick oil in the opposite direction of gravity unless it's bieng pushed up the bolt for some reason. If the threads and bolts are in good shape they should have no problem sealing and keeping oil out. Just my opinion, I have been wrong before and may be now:):)