Cutting strut rod bushings for correct geometry?

mikedevore said
If I understand this, as long as you match the correct bushing set to the strut rod that you are using, all should match?
Can you interchange the strut rods between K-meber styles, as long as you get the correct bushings for the struts you are using.

Yes or match the position the bushing meets the K-member.

Are the LCA to strut mount on the K-member, the same for all years.

67-72 strut rod

73-76 strut rods are shorter shoulder to shoulder

Good info here from everybody involved, keep it coming.
Would you want to set any type of pre-load on your chassis pivot points for a drag car?

I'm not a drag guy, but I would really think no.

You'd want to preload you chassis with the front torsion bar adjuster or moving the rear wheel up/down on a leaf spring car. Or on a coil spring rear you adjust weight jackers, spacers, or coil overs.