Hotchkiss Leafs Installed

The dropped spindles are necessary for two reasons.

At the current height there is not enough clearance at the lower bump stops even though I use 11/16 urethane pieces. The second reason is due to the drop in the current suspension, the roll center is below ground. The front roll center should be above ground in the 5" range. Once the spindles are installed, I get the crank up the t bars to put the height back to where it is now. This will correct these issues properly and should make a dramatic difference.
Once the spindles are installed, I will play with the heights to get an optimal 1.5 degree rake. At this point, I am thinking I may have to raise the rear slightly, but I want to measure the anti squat angle first. I will include pictures of my process.