what tips and trick in your stock front end (((drag car)))

I use tubular upper control arms from firm feel and I use the lower control arms pin kit from firm feel that is greaseable with urethane bushing. This gives you a lot of castor adjustablity and frees the front end up a lot. On the front strut rods I used urethane bushings (summit's cheap bushings). On the back side of the K member where the bushing goes in I feathered back the bushing so there is a small amount of contact to the k member. this really freed up the front end for me. I run a all steel 71 Demon 10.0 at 132 mph and the 60 foot is 1.35. I hope this helps you out.