*Realistic expectations..C-mon jump in!

I have a full roller setup that costs about ~1300 (cam, lifters, rockers) so I'm not sure where the 2500 comes from (the most costly part in the roller setup is rockers. I have comp pro mags). My setup is a hyd though with the specs of @.50 231/239 .515"/.550" flowing through eddy 63cc (60779) heads. Ill be using headers but for the break in, I'd use the manifolds. This cam comes in from 2400-6200 rpm and requires a 2500 stall and 3.42 gears or better and I'm using a GM 200R4 for the o/d feature.