Brads 72 Dart Swinger Done My Way

Body work done, paint started...went with Orange Sunburst Pearl and glad I did, LOVE IT!! Door jambs, under deck lid, engine compartment all painted. Will paint body by end of Feb 2012. Finished mini tubbing trunk and it is completed. Was a welder for 10 years so that was pretty easy and happy with results. I also smoothed the fire wall and removed the wiper motor, heater, and hose opening the right way. This is an Arizona car that will be a Fri Sat in good weather cruiser. Have engine at machine shop, have the great RV block from 78 with the heavy crank supports, figure 8 water jacket openings and exterior block supports and heavy mounting tabs, with 452 heads with hardened seats, having the valves back cut for 18% better flow, went with Keith Black 9.5 to 1 flat top pistons, Mopar Purple 282 484 cam and hyd lifters, Edelbrock Performer RMP intake,Holley 3310 750 carb, Schumacher ceramic headers and motor and trans mounts, 727 with manual valve body...built! and 3:91 rear end. Should be a torque monster and fun fun fun. Have parts in garage, bedroon closet, under bed everywhere...just waiting for the paint so I can start putting back together. Have Amer Racing chrome Nova 18" x 9" rears WITH 295-45 and same but 17" x 8" fronts. B&M Mega shifter, high back front bench with the fold down armrest, flat blk go wing, flt black bumble bee stripe and flat black hemi hood scoop, flat black front spoiler, will be doing a 2" drop on rear of car. Just want to get it finished in 2012! should be very possible.