904 to 833 questions

I've went through alot of these posts and have'nt found all the answers I was looking for, so I will try a new post, sorry for all the questions in advance, first time swapping to a 4 speed. I just got a 4 speed conversion kit off of ebay, comes with bellhousing,fork,zbar,clutch and brake pedal,and clutch rod,shifter and linkage. Says it will bolt up to small block mopar. I realize I will need clutch pressure plate flywheel throw out bearing, but which one? Do I need to get the same sized clutch and pressure plate? 10.5? And is there anything else off of the bell housing like brackets that I will need? The pictures of the housing there was'nt anything on it. And I have a automatic center console but not sure If I will be able to reuse it or modify it to work, I think I may need to put a shifter hump in??? I also have a 4 inch scat crank, I've read automatic cranks are'nt deep enough to except the shaft from the 833 trans, do you think I will run into this with this crank? And when ordering the flywheel will I also need to order a bushing for it or will it come with one. If I am missing anything please let me know. I don't have access to a car with a 4 speed to look at and have'nt found any pics on the net to look at. Thank U in advance.