mid america motorplex

hey alan, im not an expert on the drive line im using but i think im going to be ok. for a trans im using a tci street fighter 727, when i bought it new from summit they said it was good for 450hp. but if ya go to tci's web page they say its good for 625hp. but anyhow its still a 727 and i hear they are tough even thogh they are a little heavier and rob a little more power. as for a drive shaft i know for a fact its going to be fine, i ordered it custom from dennys drive-shafts, its a nitrous ready 3inch, they say its good for up to 2000hp, yes 2000hp. i paid them $500 bucks for it. the rear is a dana 60, not sure if its got 30 or 35 spline axles. they are "yukon gear" axles. the u joints are the BIG dana one not sure witch ones i do know that they are 1350s or bigger and they came with the driveshaft, dennys said they are good to 700-800hp. every thing listed above is was bought new about 1300 miles ago and driven on the street with a bone stock 360 in the car. now the new motor is in. the one thing im a little nervous about is the stock crank in the motor. but its to late now. well let me know what you think. here are some pics.