1.6 rockers with stock 318 cam??

moturbopar said

These are the specs for the 318 2 bbl cam out of my barracuda. if anyone is still interested in the 318 cam specs.

int duration at .050 is 180
ext .050 192
int lift .372
ext .399
109 lobe seperation

Anyways this would be the cam i would run.

http://www.summitracing.com/parts/HRS-711381-10/

Click to expand...

That cam has some good looking specs for a low compression small engine but the only problem may be the lift. At .494" lift your really pushing the limits of a stock head. I've seen stock heads slap the spring retainer at .450 lift. Most will go .465~.475" but you always have to check them.