5.7 hydrolic throw out bearing

I'll try--It's a wilwood master package deal,A tilton throw out bearing and yes that's a machined alum. front bearing retainer that was done to bring the throw out bearing within the stroke for adjustment,The hardest part that I went thru"MULTIPLE TIMES" was the pedal to master connection,BOY did I scratch my head on that one!!!!!! It took me 6 different trials and errors to get that right,PITA it was,But what finally worked for me was a heim joint because as you push on the pedal you have to account for the arc of the throw, I simply took the push rod nipple out of the pedal assembly and drilled the hole bigger for a 9/16 grade 8 bolt and then made a new push rod for the master and threaded the heim joint on the end of the push rod and then the heim joint goes onto the bolt with a nut on the other side--I can try and get a pic and put it on here--Hope some of this helps