Cam and Stall Convertor
Looking for some advice on a torque convertor. I am running a 904 with 3.91 gears and a 318. 26 9.5 14 Hoosiers. What stall should I run with the cam listed below. This is a drag car only.
Brand
COMP Cams
Manufacturer's Part NumberK20-222-3Part Type
Camshaft and Lifter KitsProduct Line
COMP Cams Xtreme Energy Cam and Lifter KitsSummit Racing Part Number
CCA-K20-222-3UPC036584046912Cam StyleHydraulic flat tappetBasic Operating RPM Range1,300-5,600Intake Duration at 050 inch Lift218Exhaust Duration at 050 inch Lift224Duration at 050 inch Lift218 int./224 exh.Advertised Intake Duration262Advertised Exhaust Duration270Advertised Duration262 int./270 exh.Intake Valve Lift with Factory Rocker Arm Ratio0.462 in.Exhaust Valve Lift with Factory Rocker Arm Ratio0.470 in.Valve Lift with Factory Rocker Arm Ratio0.462 int./0.470 exh.Lobe Separation (degrees)110Grind NumberCRS XE262H-10Computer-Controlled CompatibleNoLifters IncludedYesLifter StyleHydraulic flat tappetValve Springs IncludedYesOutside Diameter of Outer Spring (in)1.494 in.