Cam and Stall Convertor

I've run that cam in several 318's before and it requires no extra stall from a converter. The best run I have had out of it many many moons ago was mid 13's. Back by a 4spd in a "E" body though. I just rolled it off the line as hard as I could. First run was high 13's.

Dead stock 318 with bolt on's?

What year 318 and what is the Compression ratio?

If your in the 9.0-1 area, I'd step up in cam. If not, look into milling the heads. Your going to need some extra squeeze in there.