4-speed

I did this to my 69 Barracuda. Clutch pedals, depends on your clutch if you get a centerforce you will not need the spring. Z-bar and various bushings, go to Mancini they have everything you need. Shiftrods for your 4 speed and various bushings there. You will probably need a different length driveshaft. If you have a 360 you will need a bushing to go on your crankshaft to connect to the 4 speed tranny. Then there is your bellhousing, I have a scattershield, but it just depends for your. There is also the mounting point on your bellhousing and your frame for your Z-bar. I am sorry I cannot remember the actual names of the parts, but Mancini and other places will have what you need. Just call if you need too the guy at Mancini is very knowledgeable and helpful, also Tonys parts is a good place to check.