front end sits too low

Depending on how much they "sag", you can "clock" them a notch to get it to sit higher. Kind of hard to explain, but you need to have the front jacked up so the LCA's hang totally free and pull the t bars out. Adjust the adjustment bolts all the way out and get the adjuster tab so it's all the way against the adjustment bolt block (don't know if I'm using proper nomenclatures) and then slide the t bars back in. It might take some wrestling. Like I said, it depends on how twisted the bars are. If they are twisted enough, it shouldn't be too hard. DISCLAIMER: This is by no means the best method of fixing your problem. The best method would be buying new bars. I have done this once, but got new bars a couple days later.