200R4 update

I bought the TV cable and bracket from Art Carr. I modified the bracket by cutting off an ear and drilling a hole so I could mount my accelerator cable onto it as well. I was not particularly pleases with the bracket because after we got everything bolted in, the cable ears would not lock onto the bracket. I ended up running a zip tie around the cable inder the ears to keep it from pulling back through. Adjusting is simple. Everyone talks about how hard it is and how you will ruin the tranny if it isn't adjusted properly. All you have to remember is this ... when the throttle is wide open, the TV should be wide open. Not hard. It's easier with two people. Have someone hold the throttle wide open, tug the cable until it won't go any further and tighten the stop. Here are some pics. I added the accelerator cable hold down to the top. You can also see the zip tie holding the cable in place. I drilled a hole in the carb base to accommodate the anti-pivot foot on the TV cable bracket. It works very well. You can also see the high tech homemade throttle cable extender, too. We found a piece of scrap metal, ground it to shape, drilled holes and painted it black.
View attachment TV cable and bracket.jpg

View attachment TV cable and bracket 1.jpg

View attachment TV cable and bracket 2.jpg

View attachment TV cable and bracket 3.jpg