360 oil psi dropped all the sudden

Have seen all to many spun rod bearing with a stock center sump pan, windage tray, and HV oil pump. Need a good high capacity pan w some kind of baffle to keep the pick up submerged in oil. I think the reason is under hard acceleration all the oil is forced to the rear of the pan and the pick up is left dry. I have had this happen to myself even. Hard acceleration at about 6500 RPM in one of my 340s the oil pressure dropped off and she started clattering like crazy. Shut it down immediately, But was already to late. 6500 w no oil is not good for things. Still ran OK but oil pressure dropped about 10 lbs. Ended up turning the crank and installing new bearings. Now run a 7 qt pan w some oiling mods. and have never had an issue.