308 head Q

Whats wrong with the heads you have now, other than being off a 76 360? I would take the money you were going to spend on a set of 308's and the shipping and port out the 360 heads. I have used "crappy" 70's and 80's heads on non stock builds and they worked fine.

Take the money you were going to spend on a set of 308's and put it into your heads you have now. Get a porting kit and a good die grinder and do it yourself.

http://www.sa-motorsports.com/diyport.aspx


"Basic porting, while somewhat time consuming, is not hard work. It takes about 10-12 hours to do a set of average V8 heads. Some week nights and a weekend invested in your heads and your basic porting project will be complete.

Time is money, so we are not going to tell you doing your own heads will save a lot; however, most professional cylinder head porting businesses will charge $400-$600 for what is sometimes known in the trade as a "street/strip" port/polish job. Your basic porting project, done with the Standard Abrasives Porting Kit, will allow you to spend that $400-$600 on some other performance enhancement you want. "