318 with blow by

the oil that is getting let go out of the pcv will not hurt the carb then? im more worried about i guess plugging up the carb with the oil coming out of it, i dont know much about the whole carb thing and where the port lead to, but if that vaccum port wont get hurt by the oil getting let in there i will get longer hose and hook it up. i have a breather on the other side of valve cover, passenger side. pcv driver side.

thanks for all the help guys.. im assuming that the compression was good then?

i have put on a edlebrock carb and air filter so that is the only thing that is different right now on the engine. i have never heard of Erson, i believe is the valve covers that are on there now.. i have gotten edlebrock valve covers for my birthday waiting to put them on when i pull the engine next year to fix my oil pan leak. i changed out the holley that the guy put on since it ran bad, only to find out that the carb was not tight i could move it about a quarter of an inch when i went to take it off, i probley didnt need a new carb but im not a holley fan anyways.