360 build recommendations

hkeller said

I am ready to rebuild my 360 that was pulled out of a 76 Cordoba.The motor will be going into my 65 . I need some advice for my Build.
It will need to run pump gas 91 octane and be able to run the factory a/c.. Also what upgrades should i do to my 904 while its out..Thanks for any input..

Click to expand...

Probably a decent convertor in the 2500 stall medium not tight range call turbo action and give them all you planning specs etc.

Best for the money I feel, yes there are better convertors but I think for the bucks this is a decent one to use. You may want a larger style flex plate and bolt kit too? Make sure you get an external balance unit since you run a 360!

On this inside I would call Cope racing, at minimum go with the better koleen clutch kit and I think a piston(s) and if need pressure plate for the 5 stack if you dont already have this in the forward and rear drums. also a 4.2 lever and a decent TF2 transgo kit is a good start. Also the solid 2nd gear bands are better too and maybe a HD sprag kit

Make sure all ther hard parts front pump etc are in good shape too if you are doing this yourself?