360 build Ideas
yeah, I glanced at that one earlier.
So I got the engine out of the car and separatated from the trans in under two hours yesterday, took it apart today and took it over to C&S in Butler. That was the worse engine Clint has seen in a loooong time. Main bearings are brown, the crank has a ridge worn in between the rods, the pistons actually wore into the block, piston rings were nearly gone, all the bearings are toast, the cam is worn down, the valves are sunk into the heads, and the pistons wiggle on their wristpins. yeah, I think what I had budgeted for the engine is all going to be used up. They were all amazed that I hadn't blown up the engine yet. And because of my 2.76 gears I can't get a mid high cam. :( oh well I only have one picture of it out from yesterday, so I'll get some new ones of some of the parts when we take the TC over there later.
yeah, I glanced at that one earlier.
So I got the engine out of the car and separatated from the trans in under two hours yesterday, took it apart today and took it over to C&S in Butler. That was the worse engine Clint has seen in a loooong time. Main bearings are brown, the crank has a ridge worn in between the rods, the pistons actually wore into the block, piston rings were nearly gone, all the bearings are toast, the cam is worn down, the valves are sunk into the heads, and the pistons wiggle on their wristpins. yeah, I think what I had budgeted for the engine is all going to be used up. They were all amazed that I hadn't blown up the engine yet. And because of my 2.76 gears I can't get a mid high cam. :( oh well I only have one picture of it out from yesterday, so I'll get some new ones of some of the parts when we take the TC over there later.