318 went out today.

It was rebuilt probably 6 years ago and has seen too much action since then. Maybe 5 thousand since the rebuild and that was all street driven not raced. All stock internals and. 30 over pistons. Its had one of those sealed power by felpro rebuild kits put in. I belive the forged pistons with no head work done at all. Around 9-9.25 to 1 compression ratio. I could be wrong on the c/r too it was a while ago and I hid all the recipts and notes i had written down from the wife I would have to dig them out. The cam was around a .450 to. 460 lift it was small. Edelbrock performer intake with a carb spacer and a holley 3310(750 vac seconds). Never had it weghed but if I had to guess maybe 3000 with no driver. All the seat are out but the drivers of course. Dash is custom made manual steering fuel cell fiberglass hood and aluminum rims no ac or heater core. Skinnies up front m/t steet legals and hoosier slicks 28 9 15s in the back. But then again I took all that stuff out and added frame connectors and a steel 10pt cage for future use. Like I said the weight is a guess. But for a very mild motor I think I did alright. Thanks guys I was grinning ear to ear over a 13.90. More to come.