LED Dash Light

ok so i "restored" the cluster today! and while doing it i figured it would give some tips along the way so here it goes...

Cluster Resto on the Cheap!

first off removing it...
its easiest to drop the column, the two nuts and bolt loosen the plate from the dash, then loosen the three bolts on the firewall... this will give you enough room to drop the cluster...

you also need to remove the battery cable so you can disconnect the amp gauge connections, and the 2 plug in's on the back... Oh! and the brake system light on the far left...

so after getting it out here is what i did!