**Twin Turbo 67 Dart Project**

USCG CHARGER said

Yeah we did the same with my car as well.. what length shock are you using? Also will urs sit about how mine sits? I can't get any lower without the rear tire hitting the back of the fender.. not to mention the shock right now is mid tavel. If we would have put mine in straight up then we would have needed to go with a shorter shock. my rear shock tower bar is located 1/2" from the bottom of the trunk hump.

Click to expand...

When I did the mini tub I clearance'd the entrance at the rear and forward parts of the tub using a BFH with heat along with the upper areas of the inner tub. So it clears everything no problem. It will sit about 1" to 1 1/2" lower than yours. Shocks are 15.4 Extended Length and 10.74 Compressed. My shocks should work. I can really slam the rear end down without it hitting anything. Shock placement on the Axle Housing will determine how low I want to take it. Where the shocks are mounted in the pictures the wheel should disappear by about 1 1/2"-2" in the fender well.