Torsion Bar Install

As stated above, left and right bars twist in opposite directions, so must go in the correct side.

Front and rear does not matter if the torsion bar hexes are not offset in their clocking. Hold a pen horizontally in front of you with one hand on each end. Now twist one way with your left hand and the opposite way with your right to simulate the twisting action in one direction. Without letting go cross your hands to reverse the direction of the pen while twisting, and you will see that the pen is still twisting in the same direction.

If the hexes on the bar are offest, then reversing the front and back may affect the preload of the spring at a given height, so front/rear position will have some impact, either more or less preload at intended ride height. In this case, it would be important that both are installed in the same F/R direction or preload will vary from side to side.

Grant