'72 Scamp-not really a "restoration"

Ok, so I neglected to put up pictures of the a/c heater box going back together and going back into the car, but there are a few other threads on that one, so I don't feel too bad. I was making good progress putting things back together anyway. That being said, if any of you guys need to restore your a/c heater boxes and aren't aware of Detroit Muscle Technologies rebuild kits, I'll put another plug in for them-the pieces are of good quality, they fit great, the instructions are easy enough to read, there are illustrations and the customer service is quick, polite, and personable. They have their own website plus an eBay store, so peruse if you're in need.

Just make sure you label all the vacuum hoses. I put tape around mine, but realized after I stabbed the boxes back into the dash I had labeled them...well, not very well. I fiugred it out, but not before some headscratching and foul oaths escaped.

My only problem now is to find a decent blower motor...I think I locked it up while trying to remove the squirrel cage-jammed up tight as a drum. I found one on parts geek since I couldn't seem to locate one from Rock Auto (weird?) for about $62. If anyone has any input on this one, I'd like to hear it.

While I was waiting for some RTV to dry on the housing, I found some moments to replace the sending units for my new Phantom gages. So, after the HVAC stuff all goes back together, I'll start on wiring/installing the new dash from Peak Dashes. I also picked up a dual speaker plate from one of the guys on here-I posted up pictures in that thread, guess I should put them up on here too. I'll have to crawl up underneath later on today after I get away from work and take some pictures of it installed too.

Anyway, I gotta head out for the time being-enjoy!