Top End Miss

ok so i opened up the pick up gap from a couple thousandths to about .016 with my finger on the shaft for "tension" (about .001 or .002 movement)...

anyways re checked timing and went for a drive... right off i noticed i had about a .5" more vacuum at cruise (this being over yesterday after installing and tuning the 750)... seems to pull better to... anyways hammered on it and it was hard to tell if it missed at 5800 or 5900, so there could be gain there! so i'll let it cool and open it up some more and try again...

also for the first time it idles in gear without two footing it! only have about 6" of vac at 700 rpm but it still runs, and not trying to die either...