Well it fits. I modified the front hangers so there will be plenty of adjustment. I am working this one off the 1/3 - 2/3rd's rule. 2/3rd's of space is at the lower link bar location on the bottom of the axle and 1/3 is at the top from center of axle. Almost all adjustments will be done at the front of the Rod End by going up or down on either. Instant Center to start will be 12" back from the front tire & 9" off the ground. Plenty of adjustment to put it out past the front bumper or 1' in front of the rear tire.
I have the front upper hangers cut and drilled. When making them I will be sandwiching the frame rail up and around so they should be pretty darn strong.