XV Motorsports Seat Belts

I purchased the XV belts for my bench seat 68 Barracuda. Here are my comments.

1. The retractor that bolts to the floor won't fit between the seat and rocker. I had to weld in a new mounting point into the rocker about 8" back from the stock position.

2. The inner belt is way to long and doesn't have a sleeve that keeps it from twisting. The length was such that the buckle wound up in the middle of your stomach and the shoulder belt didn't lay across your chest. I had a set of universal belts that allowed you to adjust the length at the floor anchor so I cut off the anchor and used that. I also made a junk yard run and harvested some plastic sleeves to slip over the inner belt to keep them from twisting.

3. The shoulder anchor has a very large hole for mounting. You will need to go to some place like McMaster Carr.com to get shoulder bolts that will fit the car and keep the mount supported.

All I'm all I think that XV is just putting there logo on a universal three point belt and there is nothing specific to our cars.