Fuel injectors on Indy Modman Intake

It sort of has provisions for mounting rails, but not the easiest ones to work with. There are two smaller pads on either side right next to the breather ports that you can drill and tap. If you look at pictures of their pre-drilled intake it looks like they just thread a stud in them that the rails somehow mount on. I just bolted L brackets to mine (top of the top picture), but had to grind quite a bit to clearance the tubes I screwed into the ports for my PCV and breather. I originally made U brackets to hold the rails better, but the bottom side hit the valve covers, so I just chopped them down to L's.