I mentioned the header panel earlier because you hadn't. You may need to move one fender forward or back to get the header panel right to the fenders and the hoods edge. There is a little adjustment where the header meets the fender but not a lot.
Hold the A-piilar moulding to the post and check that line and those joints at the sail panel lines too.
Surely you have used reveal mouldings from a 68 or 69. Those will have small blimished discolored ends where they overlapped before. When installed on a 67 they will be pushed a little farther apart ( less overlap ) and expose those blemishes. Polish away the blemishes before installing and you're golden.