Calling all 67' to 69' barracudas

cudascott said

Yea I have remove a fair amount of lead from those joints at the corners of the rear window (fastback) to level them up i will be fitting them trim once the sheetmeatal is straight and aligned properly. Do the trim clips go as far down against the pinch weld as possible?

Click to expand...

Depending on what clip you have. I had to grind the aftermarket clips I purchased so they sit low as the factory originals. In other words, Low as they'll go may not be low enough for some clips.
Their isn't a full bed at the bottom of the front window. There are 4 fingers that catch the gasket. Those fingers are on the bed line though so a clip held against that finger would reflect the clip height positioned where they belong.