73' B3 340 Duster pro touring build

It took all day to mount the seats but it was no easy task....I could have jsut bolted them in but I would have all kinds of issues with the console and headroom. So I cut apart the seat mounting brackets and made new bolt mount tabs which lowered the seat over 1" (Wracks71 was right back in May when he told me I'd probally have to lower them) and then used the lowest factory hole (in the background of pic with tabs)and cut the other two off which gave me another 1/2". Then there was the issue of console clearance (The custom console is 10" wide) I couldnt move the seats out since the factory floor pan where a bench seat would mount was causing major problems so the only solution was to cut out the problem and replace it with a flat piece of steel..I still have to re-make the seat reinforcements, but that should be easy. So 8 hours later I had two mounted seats. Also recieved my dash from Peak Dashs, I'm sure there will be issues there from what I hear from other Members. But after 3 1/2 months I'm just happy to have something. I'm getting use to having to modify just about everything I buy for this car....more on that later.