Help Are there any radiators that fit a-bodys!!

None of my three 60's Mopars has a factory radiator any more. As 1Fast340 says, if the upper and lower tubes are in the right place and you can mount it so it doesn't hit the fan and you can close the hood, it will work. Maybe not climbing out of the L.A. Basin when 110 F, going uphill at 65 mph for 30 min, with a big block, but then many factory designs can't handle that as evidenced by the boiled-over car every 1/4 mile. At least your heads won't warp. Kudos if you can fit a shroud (I did on 2 of mine).

I use a dedicated tranny cooler in all 3 cars, which makes the radiator simpler. Some advise against that. I had to use a shorter nylon fan to fit my Dart, because of the thicker aluminum water pump. My slant currently has only an electric fan (as found).

Most radiators have a 1.5"D top tube, as do all A-bodies, so that is easier. If you have a slant or small block w/ cast-iron water pump, you have a 1.5"D lower hose. All others are 1.75"D. You can fit a 1.75"D hose on a 1.5" radiator tube w/ a rubber sleeve (or cut a 1.5" hose) but not vice-versa. You have to thumb thru various hoses on ebay to find one that might fit. Sometimes you must use 2 sections of hose to make it work. Many hot rodders buy a new Ford V-8 truck upper 1.5" hose since it is long with many turns and cheap, so they can make a 2-part hose work. You can find aluminum hose splices on e-bay, some w/ pretty colors and ports for temp sensors and such.