Installing Headers

you will have to take the pressure off the torsion bar adjuster, pop the upper ball joint OR if you have disc , you will have unbolt the lower ball joint. unbolt the tie rod and sway bar ,unbolt the strut rod, unbolt the lower control arm , pound it backwards and then forward to pull the torsion bar back. this is a lot of work. i have NEVER seen a set of headers that required the torsion bars to come out.

you have to get the front of this car 2 1/2 -3 feet off the ground. take the filter off, and it will slip in there. trust me it will go in easily. then do the drivers side.
i took my braces completely off and never put them back on as per instructions